HR Truck Licence Practice Test NSW

Free unlimited practice for the NSW Heavy Vehicle Knowledge Test — 45 questions, based on the Transport for NSW practice bank.

Start Free Truck Practice Test See what's on this page
Free, no sign-upEvery set marked as you goProgress saved with an account
Inside the cab of a rigid truck on an Australian highway, the driver checking mirrors

The NSW Heavy Vehicle Knowledge Test at a glance

The NSW Heavy Vehicle Knowledge Test has 45 questions and is computer-based, run by Transport for NSW. It comes in two versions — heavy vehicle rigid (classes LR, MR, HR) and heavy vehicle combination (classes HC, MC). You book it online through myRTA or at a service centre, and a test fee is payable each attempt. Passing the knowledge test is the first step, before the HVCBA or the heavy vehicle driving test. Transport for NSW sets the pass standard, so practise until your mock results come back consistently clear of mistakes, and confirm the current rule with the authority before you book.

45 questionsHeavy Vehicle Knowledge Testper Transport for NSW
2 versionsRigid (LR, MR, HR) & combination (HC, MC)per Transport for NSW
Computer-basedBooked via myRTA or a service centrefee payable each attempt

Which heavy vehicle class — and which test version — is yours

Five heavy vehicle classes sit across the two test versions. Each has its own vehicles and its own tenure requirement before you can apply — all figures below are stated by Transport for NSW.

LR — Light Rigid

Rigid test versionEntry

Trucks and buses up to 8 t GVM (a bus carrying over 12 adults), with a trailer up to 9 t GVM. You must have held a class C licence (not a learner) for 1 year or more (Transport for NSW).

MR — Medium Rigid

Rigid test versionRigid

Vehicles over 8 t GVM with 2 axles, trailer up to 9 t. Requires a class C licence held for 1 year or more (Transport for NSW).

HR — Heavy Rigid

Rigid test versionRigid

Vehicles over 8 t GVM with 3 or more axles, trailer up to 9 t, including bendy buses. Requires a class C licence held for 2 years or more (Transport for NSW).

HC — Heavy Combination

Combination test versionCombination

Articulated vehicles with 3 or more axles, or a rigid plus trailer over 9 t GVM. Requires a class MR or HR licence held for 1 year or more (Transport for NSW).

MC — Multi Combination

Combination test versionTop class

B-doubles and road trains. Requires a class HR or HC licence held for at least 1 year, plus the HVCBA and a medical assessment (Transport for NSW).

Your free truck practice on this page

Practise free on this page — for any free set. This page carries nine practice tests of 45 questions each in the real test's shape, eight mock tests of 45 questions each to sit under test conditions, and fourteen topic sets so you can drill one subject at a time. Start with a full practice test to find your weak subjects, drill those topic sets, then finish on the mock tests until your results are consistently clear of mistakes.

General Knowledge

83 questionsCore

The largest topic set on this page — core road rules every heavy vehicle driver must know.

Traffic Signs

50 questionsCore

Regulatory, warning and information signs drilled one at a time.

Traffic Lights & Lanes

34 questionsTopic

Lane discipline and signalled intersections for larger vehicles.

Load Restraint

26 questionsHV-only

A heavy-vehicle-specific subject a car learner has never studied.

Fatigue & Defensive Driving

26 questionsHV-only

Fatigue management and work-diary rules for long-haul driving.

Combination Vehicles

15 questionsCombination

Off-tracking, wide turns and coupling for HC and MC drivers.

What the test covers, and how it differs from the car DKT

The official practice bank for the rigid test has 343 questions across three sections — General Knowledge, Road Safety and Traffic Signs — published in the Transport for NSW practice PDF (plus three ICAC integrity questions). Your study material is the Heavy Vehicle Driver Handbook, the Road User Handbook and the Load Restraint Guide, all named by Transport for NSW as the source for the test. The real difference from the car learner test is a block of heavy-vehicle subjects a car driver has never studied: off-tracking and wide turns, load restraint, longer stopping distances, larger blind spots, heavy-vehicle speed limits, and fatigue management with work diaries. These are the topics that trip up experienced car drivers who assume the knowledge carries over — it does not. The question bank behind the practice sets on this page is NSW-based and drawn from these NSW handbooks, so the mechanics map to the NSW test. If you already passed the car learner test, treat the heavy-vehicle additions as genuinely new study, not a refresher — the margin for error is tighter and the physics of a loaded truck is the whole point of the extra material. Read the Heavy Vehicle Driver Handbook first, then practise the subjects above until the heavy-vehicle-specific questions stop surprising you.

How to book and sit the knowledge test

Book the Heavy Vehicle Knowledge Test online through myRTA or at a Service NSW centre, per Transport for NSW. You sit an eyesight test as part of the process, and a test fee is payable each attempt — Transport for NSW sets the amount, so check the current fee on the Transport for NSW driver and rider licence fees page before you book. Bring your completed licence application form to the centre. Once you pass the knowledge test, your next step is either the HVCBA with an accredited provider or the heavy vehicle driving test, depending on your class. The test is computer-based and sat at the centre even when booked online.

A seven-day plan to pass first time

Seven days is enough to prepare if each day has a job. Each step below names a set on this page so you always know what to open next.

  1. 1

    Day 1 — Read the handbook

    Read the Heavy Vehicle Driver Handbook cover to cover, then sit practice test 1 to benchmark where you stand.

  2. 2

    Day 2 — First full practice test

    Sit a full 45-question practice test and write down every subject you missed.

  3. 3

    Day 3 — Two topic drills

    Drill your two weakest topic sets — General Knowledge and Traffic Signs are the biggest on this page.

  4. 4

    Day 4 — Two more topic drills

    Continue with Traffic Lights & Lanes and Intersections, or whichever sets you kept missing.

  5. 5

    Day 5 — Load restraint and fatigue

    Work the Load Restraint and Fatigue & Defensive Driving sets — the heavy-vehicle subjects car drivers skip.

  6. 6

    Day 6 — Two mocks back to back

    Sit two mock tests back to back under test conditions; aim to finish each consistently clear of mistakes.

  7. 7

    Day 7 — Final mock, then book

    Sit one final mock. If it is clean, book the test through myRTA or a service centre.

Sitting it in another state

The practice sets on this page draw on the NSW question bank, so they match the NSW test most closely. Each state runs its own heavy vehicle knowledge test through its own authority: Transport for NSW (NSW), Transport and Main Roads (Queensland), VicRoads (Victoria), the Department for Infrastructure and Transport (South Australia), the Department of Transport (Western Australia), and the Motor Vehicle Registry (Northern Territory). NSW figures — the question count, the format, the tenure rules — do not automatically apply to another state, so confirm the number of questions, the pass rule and the fee with your own state's authority before you sit. If you are testing in the Northern Territory, start with our Northern Territory page for the local authority and process. The practice here still builds the underlying road-rules knowledge wherever you sit.

After the knowledge test: HVCBA, the driving test and the MC medical

After you pass the knowledge test there are two roads to the licence, both per Transport for NSW. You either complete the HVCBA — competency-based assessment with an accredited provider — or sit the heavy vehicle driving test, depending on your class and provider. For the MC class you must complete the HVCBA and pass a medical assessment. P2 tenure counts toward the HC eligibility period, but you need an unrestricted licence to actually upgrade. Confirm the current pathway and any medical requirements with Transport for NSW before you book, as class rules differ by licence.

Official sources

The rules on this page follow the official requirements published by Transport for NSW Heavy Vehicle Knowledge Test; Getting a heavy vehicle licence (Transport for NSW); Transport for NSW driver and rider licence fees. Always confirm current rules and fees with the authority before you book.

Frequently Asked Questions

How many questions are on the HR knowledge test?
The NSW Heavy Vehicle Knowledge Test has 45 questions, run as a computer-based test by Transport for NSW. HR sits the rigid version, shared with LR and MR. Practise with the nine 45-question practice tests on this page to match the real test's shape.
What is the pass mark for the heavy vehicle knowledge test in NSW?
Transport for NSW sets the pass mark for the Heavy Vehicle Knowledge Test. The practical way to prepare is to sit the mock tests on this page until your results come back clean run after run, then confirm the current requirement with Transport for NSW.
Is the truck licence practice test free?
Yes. Every practice test, mock test and topic set on this page is free with no sign-up. You get nine practice tests, eight mocks and fourteen topic sets covering the heavy vehicle knowledge test, all based on the NSW question bank from Transport for NSW handbooks.
How is the truck knowledge test different from the car DKT?
The heavy vehicle test adds subjects a car learner never studied: off-tracking and wide turns, load restraint, longer stopping distances, larger blind spots, heavy-vehicle speed limits and fatigue management. Study material is the Heavy Vehicle Driver Handbook, Road User Handbook and Load Restraint Guide, per Transport for NSW.
Am I eligible for the HR licence?
For an HR licence you must have held a class C licence (not a learner) for 2 years or more, per Transport for NSW. HR covers vehicles over 8 t GVM with 3 or more axles, a trailer up to 9 t, and bendy buses. Confirm your exact eligibility with Transport for NSW.
What is the difference between LR, MR and HR?
Per Transport for NSW: LR covers trucks and buses up to 8 t GVM (needs class C for 1 year); MR covers vehicles over 8 t GVM with 2 axles (class C for 1 year); HR covers vehicles over 8 t GVM with 3+ axles and bendy buses (class C for 2 years). All three sit the rigid test.
Can I do the heavy vehicle knowledge test online?
You book the heavy vehicle knowledge test online through myRTA or at a service centre, but you sit it computer-based at a centre, per Transport for NSW. You also complete an eyesight test. You can practise online for free on this page before you book your attempt.
How much does the heavy vehicle knowledge test cost?
A test fee is payable each attempt. Transport for NSW sets the amount and it can change. Check the current fee on the Transport for NSW driver and rider licence fees page before you book. Practice on this page is free.
ADVERTISEMENT

Practise the real thing, free

Car, motorbike and heavy-vehicle question sets in the official format, marked as you go, with the rule explained under every answer. No account needed to start.

Independent study resource. Not affiliated with, or endorsed by, Transport for NSW, VicRoads, TMR, Service NSW or any government agency. Always check the current rules with your state authority.